This guide is going to take you through setting up your Z5 Compact. We'll cover all the basics - from inserting the SIM to protecting your phone with a screen lock.
The Xperia Z5 Compact uses a MicroSIM, and you can add extra storage by using a MicroSD card. Both of these go into slots in the side of the phone.
Look on the bottom-left hand edge of the phone for the card cover. There is a small notch - use your thumbnail in here to prise the cover away from the phone.
Pull the SIM tray out of the upper slot, and place your NanoSIM on it, with the metal contacts facing upwards.
Slide the tray back into the phone, again keeping the metal contacts facing upwards.
If you're using a MicroSD card, slide this into the lower slot, but with the metal contacts facing downwards.
Put the cover back over the slots.
Press and hold the power button on the right-hand edge for 2-3 seconds to turn the phone on, and start setting it up.
When the phone is turned on for the first time, it will load up the 'Setup Wizard' - this is a series of steps that will get the phone ready to use.
Choose your language, and then press Start.
You'll need to read the important information - tap it to read it, and if you're happy with it, tick the box and then tap Next.
Choose if you want to use Wi-Fi only, or Wi-Fi and mobile data, then tap Next.
Check the date and time are correct - tap Change if it's not.
To connect to Wi-Fi, tap Search for networks, or to continue without Wi-Fi, tap Skip.
Tap the Wi-Fi network you want to connect to.
Type the password for the Wi-Fi network - if you're not sure what this is, you can normally find it on your router.
Press Connect, and if it works, you'll see the word 'Connected' underneath your Wi-Fi, and you'll see Wi-Fi signal bars at the top.
Press Next, then Next again.
Tap Get Started on the Google page.
If you've had another Android phone, and it supports NFC, you can transfer some of the data on it to your Xperia Z5. Tap the two phones together to get started, or tap Skip if you don't need to transfer anything.
If you've got a Google account, type in the email address and press Next. If you want to create a Google account, tap Or create a new account. If you don't want to use one, tap Skip.
To let Google check the device for security, tap Accept, or tap Decline.
Type in your password for your Google account, and tap Next.
You might be asked to add some payment info to your Google account. If you want to, tap a payment type, then tap Next and fill in the details. If you don't want to add any, tap Remind me later, and tap Next.
18. Read through the Google Services, and keep the boxes ticked for the ones you want to use.
Tap Next again.
Read through the Xperia Services, and tap Sign in with Google to use them, or tap Skip if you don't want to use them.
If you skip signing in, you'll be asked to set up a screen lock. Tap Skip to continue, or Go back to sign in.
The Setup Wizard is now done, tap Finish to exit it.
Tap Next on the data disclaimer, and then tap OK to close it.
You'll now be looking at the Home screen. The bottom row of icons are for some of the most common apps - Phone, Messages, Contacts and Camera. In the middle is the Apps button, which will show you all the other apps installed on your phone.
At the bottom of the phone are the navigation buttons, which you can use to help you move around the phone.
A lot of the features of your Xperia Z5 Compact, like downloading apps and games, loading email or going on websites, need an internet connection. You can connect to the internet using Wi-Fi or mobile data, and we go through these now.
From the Home screen, tap Apps, then tap Settings.
Tap Wi-Fi, and check the switch at the top is turned on on - tap it if it's not.
Tap the Wi-Fi network you want to connect to.
Type in the Wi-Fi password - if you're not sure what it is, try looking on your router.
Press Connect, and if this works, you'll see the word 'Connected' underneath your Wi-Fi, and you'll get Wi-Fi signal bars at the top.
Your Z5 Compact will always try to use Wi-Fi, so to test mobile data you'll need to turn it off.
Go to Settings > Wi-Fi > Turn switch off
With it off, check at the top of your screen for a '4G' or '3G' symbol, which indicates your mobile data connection. You might see '2G' or 'E' if your signal isn't the best, but it will still work. If you can't see any symbol, follow these steps to check your mobile data settings.
Tap Apps on the Home screen, then tap Settings.
Tap Data Usage.
Check that the switch for mobile data is turned on - tap it if it's not.
Check again at the top for a mobile data indicator.
If you're still not seeing one, you can try downloading the settings by tapping Internet Settings, then Accept. This will download the right settings for your network, and set them up on the phone.
If that doesn't work, you can try settings up the 'APN settings' manually. We have detailed guides for each network, which you can read here.
Your Z5 Compact can work with many types of account, and adding one lets you read your email, send new ones, and your phone will let you know when new ones come in.
Open Settings from the Home screen.
Scroll down, and tap Accounts.
Tap + Add account.
Choose the type of account you've got. For work or school accounts, tap Exchange ActiveSync, or for personal accounts, tap Email.
Type your email address and tap Next.
Type your password, and press Next.
You might be given some account options, like how often your phone checks for new messages. Choose your options and then tap Next.
Give the account a name.
Type your name in the bottom box - this will show on messages you send.
Your email account is set up, and you can see your emails by opening the Email app from the Home screen.
If your account does not automatically get added, or asks you for any settings, you will need to do a 'manual setup'. You'll need to know your email account's settings, but don't worry if you're not sure what these are, we have a dedicated guide to email server settings that should cover most accounts.
Adding a screen lock will help keep your photos, messages and other data safe. There's a few different options for this, and we'll go through each of them.
Scroll down and tap Security.
Tap Fingerprint Manager.
You'll need to set a PIN or password first - tap Get Started.
Tap on either PIN - a 4-digit code, or Password - a code made up of numbers and letters.
Type in your code, and tap OK.
Confirm it by typing it again, and tap OK.
Choose which notifications you want to see on the lock screen, and tap Next.
Read the fingerprint sensor information, and tap Got it.
Place your finger on the fingerprint sensor, and lift it when you feel a vibration. Repeat this until the phone has a full scan of your fingerprint.
When it's finished, tap Done.
Your phone is set up, and you can start using it. Or to speak to our Team Knowhow Experts, get in touch here.
If you've got an issue with any of your kit, our experts are on-call to help 24/7 - in-store, at home, or over the phone.More info
When your kit's fully broken, you need it fixed fast. Our accredited experts will get you back up and running in no time.More info